Load data for 9 mm Steyr (Roth) + .355 | 68gr | Lehigh Defense Xtreme Defense

Recommended Powder(s): Rottweil P 801

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 68gr \| Lehigh Defense Xtreme Defense
Manufacturer SKU:	09355068PFC
Bullet Weight:	68gr \| 4.4g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.508" \| 12.9mm
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	1.153" \| 29.3mm
Seated Depth:	0.268" \| 6.8mm
Shank Seated Depth:	0.268" \| 6.8mm
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B11026_C1226
Last updated:	2025-11-04

Load data for 74 loads in caliber 9 mm Steyr (Roth) with .355 | 68gr | Lehigh Defense Xtreme Defense bullet and 37 powders such as Rottweil P 801. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	74%	17172	88%	**27	93%
ADI APS 350	<<locked>>	66%	17027	87%	**34	100%
ADI APS 450	<<locked>>	69%	17376	89%	**80	100%
ADI AS 30	<<locked>>	77%	17231	88%	**55	100%
ADI AS 50N	<<locked>>	75%	17114	87%	**71	98%
Accurate Solo 1000	<<locked>>	75%	17593	90%	**52	98%
Accurate Solo 1250	<<locked>>	87%	17332	89%	**98	92%
[Alliant BULLSEYE]*	<<locked>>	73%	17143	88%	**98	86%
[Alliant Sport Pistol]*	<<locked>>	69%	17303	88%	**04	85%
[Alliant UNIQUE]*	<<locked>>	90%	17347	89%	**40	85%
Baschieri & Pellagri 100	<<locked>>	80%	17056	87%	**58	97%
Hodgdon Clays	<<locked>>	66%	17013	87%	**50	100%
Hodgdon Universal	<<locked>>	82%	17172	88%	**27	93%
Hodgdon CFE Pistol	<<locked>>	84%	17535	90%	**14	92%
[Hodgdon TrailBoss]*	<<locked>>	95%	5192	27%	**6	83%
Lovex S011	<<locked>>	66%	17056	87%	**45	94%
[Lovex S020]*	<<locked>>	81%	16853	86%	**07	88%
Maxam CSB 1	<<locked>>	90%	17390	89%	**91	93%
Maxam CSB 2	<<locked>>	95%	17579	90%	**96	98%
Maxam CSB 3	<<locked>>	83%	17419	89%	**91	97%
Maxam CSB 4	<<locked>>	79%	17564	90%	**88	99%
Maxam CSB 5	<<locked>>	74%	17535	90%	**68	100%
[Ramshot Silhouette]*	<<locked>>	72%	17303	88%	**04	82%
ReloadSwiss RS 12	<<locked>>	82%	17303	88%	**83	99%
[ReloadSwiss RS 20]*	<<locked>>	92%	17216	88%	**34	87%
Rottweil P 801 👍	<<locked>>	74%	17521	90%	**44	100%
[SNPE Vectan A0]*	<<locked>>	88%	17579	90%	**68	85%
SNPE Vectan BA 9	<<locked>>	78%	17405	89%	**58	90%
SNPE Vectan BA10	<<locked>>	64%	17376	89%	**80	100%
SNPE Vectan BA9 1/2	<<locked>>	81%	17027	87%	**88	92%
[Somchem MP200]*	<<locked>>	81%	17492	89%	**11	83%
[Somchem MS200]*	<<locked>>	84%	17405	89%	**94	86%
Vihtavuori N320	<<locked>>	82%	17593	90%	**27	99%
Vihtavuori N32C Tin Star	<<locked>>	96%	11893	61%	**30	100%
Vihtavuori N330	<<locked>>	85%	17042	87%	**50	94%
[Vihtavuori N340]*	<<locked>>	88%	17579	90%	**11	86%
Winchester 231	<<locked>>	67%	17477	89%	**94	94%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	62%	11734	60%	**30	87%
ADI APS 350	<<locked>>	62%	15461	79%	**94	100%
ADI APS 450	<<locked>>	60%	13503	69%	**71	100%
ADI AS 30	<<locked>>	61%	10921	56%	**35	97%
ADI AS 50N	<<locked>>	62%	11574	59%	**81	93%
Accurate Solo 1000	<<locked>>	62%	12314	63%	**78	94%
[Accurate Solo 1250]*	<<locked>>	66%	9500	49%	**02	81%
[Alliant BULLSEYE]*	<<locked>>	65%	13489	69%	**70	81%
[Alliant Sport Pistol]*	<<locked>>	63%	14185	72%	**96	81%
[Alliant UNIQUE]*	<<locked>>	80%	13489	69%	**06	80%
[Baschieri & Pellagri 100]*	<<locked>>	60%	9456	48%	**79	87%
Hodgdon Clays	<<locked>>	62%	15534	79%	**11	100%
[Hodgdon Universal]*	<<locked>>	61%	9297	47%	**15	82%
[Hodgdon CFE Pistol]*	<<locked>>	63%	9442	48%	**09	80%
[Hodgdon TrailBoss]*	<<locked>>	91%	4772	24%	**3	81%
Lovex S011	<<locked>>	60%	14112	72%	**43	91%
[Lovex S020]*	<<locked>>	70%	11705	60%	**24	80%
[Maxam CSB 1]*	<<locked>>	66%	9036	46%	**79	80%
[Maxam CSB 2]*	<<locked>>	63%	6730	34%	**30	81%
[Maxam CSB 3]*	<<locked>>	60%	8949	46%	**73	86%
Maxam CSB 4	<<locked>>	61%	10327	53%	**38	92%
Maxam CSB 5	<<locked>>	61%	11908	61%	**91	100%
[Ramshot Silhouette]*	<<locked>>	70%	16143	82%	**68	80%
ReloadSwiss RS 12	<<locked>>	61%	8340	43%	**42	90%
[ReloadSwiss RS 20]*	<<locked>>	82%	13126	67%	**83	80%
Rottweil P 801	<<locked>>	60%	11023	56%	**30	97%
[SNPE Vectan A0]*	<<locked>>	80%	14199	72%	**60	80%
[SNPE Vectan BA 9]*	<<locked>>	61%	10588	54%	**12	80%
SNPE Vectan BA10	<<locked>>	62%	15998	82%	**47	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	61%	9253	47%	**89	80%
[Somchem MP200]*	<<locked>>	76%	15026	77%	**32	80%
[Somchem MS200]*	<<locked>>	73%	12966	66%	**40	80%
Vihtavuori N320	<<locked>>	61%	9427	48%	**29	91%
[Vihtavuori N32C Tin Star]*	<<locked>>	60%	4525	23%	**0	85%
[Vihtavuori N330]*	<<locked>>	64%	8833	45%	**02	80%
[Vihtavuori N340]*	<<locked>>	78%	13402	68%	**70	80%
Winchester 231	<<locked>>	60%	13692	70%	**63	90%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data